Fire Detection & Alarm System


IRIS Fire Panel (Modbus)

addressable System for Medium to Large Sites

IRIS PRO is an addressable fire alarm panel with 1 to 4 loops and maximum coverage of 96 zones. Up to 250 devices can be connected to every system loop.
With special “2 steps of alarm level” working algorithm the false alarms are effectively minimized. The panel has a comprehensive day/night mode facility.
Up to 64 IRIS PRO panels can be connected in Ethernet network or RS485 redundant network.

SIMPO Fire Panel (Modbus)

addressable System for Small to Medium Sites

SIMPO is the perfect solution for smaller addressable installations. The addressable panel supports up to two loops with coverage of 48 zones. 250 devices operating on Teletek Electronics communication protocol could be connected to each loop. System status is visualized via LCD display and LED indication. Up to 32 Simpo panels can be connected in RS485 redundant network or Ethernet network.

MAG8 Plus

conventional System for Small to Medium Sites

MAG8Plus is a conventional fire detection and indication panel certificated to EN54-2/4. The panel has 8 fixed and is expanded up to 16 zones. MAG8Plus is based on a modular principle – a power unit, a control panel, zone/sounder expanders, an indication module and battery space. A detailed LED indication shows the status of the system.


addressable Detectors & Signalling Devices

SensoIRIS series of detectors are intelligent addressable and covers all type of devices such as Optical Smoke detectors, Temperature detectors can work as a fixed temperature or rate of rise detector. The great benefit is class, selectable from the control panel – A1/R, A2/S, B/S. Manual Call points indoor / outdoor.

SensoIRIS GAS is LPG and CH4 (Methane), leakage detector.

Signalling devices covers all indoor / outdoor requirement whether you need a sounder or sounder / beacon all are available to cater any yours need.

conventional Detectors & Signalling Devices

SensoMAG series of detectors are conventional technology and covers all type of devices such as Optical Smoke detectors, Temperature detectors can work as a fixed temperature or rate of rise detector. The great benefit is class, selectable from the control panel – A1/R, A2/S, B/S. Manual Call points indoor / outdoor.

Signalling devices covers all indoor / outdoor requirement whether you need a sounder or sounder / beacon all are available to cater any yours need.

Fireray One is a standalone beam detector that prioritizes ease of installation. Using the Fireray One, utilizes One minute Auto alignment technology.

CCTV Integration

observer Monitoring Software with CCTV integration

Observer is a software application for monitoring of sites equipped with Teletek Electronics addressable fire alarm systems. The software monitors the condition and state of detectors with their respective zone and name. It also detects faults in the panel and allows the panel to be controlled. Observer signals visually and audibly in case of alarm or fault. If you have VPN network for example you will be able to connect up to 32 panels to 1 Observer software.

Observer allows direct import of files from ProsTE programming software, which contain the full information regarding the system configuration.